KEMPTON GT 12A
Description
GT 12A Polypropylene enclosures
Shape
The Asymmetrical trapezoidal shape design provides a 45° taper angle for stage monitoring applications as well as for a general Front of House P.A. system
Pole Mount Sockets & Handles
For speaker stand mounting all GTs are equipped with a 35mm Ø (13/8”) aluminium pole mount socket. The GT Series models feature ergonomically placed carrying handles for a balanced “feel” when handling transporting.
Grilles
Extremely rugged 1.2mm (0.05”) steel grilles protect
the woofer without detracting from its sonic
performance in any way.
Rigging/Fly points & Stacking capabilities
All GT enclosures are provided with multiple M10 fly points to accept standard M 10 eye-bolts to facilitate safe and easy flying capabilities. The enclosures are equipped with rubber feet and stacking positions that are moulded into the cabinet enclosures, allowing stable stacking of 2 cabinet enclosures.
Power Amplifier (GT12A)
The bi-amplification system of the GT12A consists of two independent Class AB amplifiers, one for the LF woofer and one for the HF compression driver/ horn. Independent LF & HF Thermal and shortcircuit protection circuits are also featured. The Crossover circuitry features an active electronic 24dB/oct Linkwitz-Riley design. The innovative 2-channel on-board mixer (CH A and CH B) with each one featuring: Preamp Gain, Volume, High Frequency EQ, Low Frequency EQ controls, XLR/Jack combo inputs. An XLR-M output jack provides mixed signal output of input channels A and B.
This can be use as a Live Front of House Sound Reinforcement in Clubs, Discos, Piano Bars, Conference Halls, Houses of Worship, Sports Arenas, Schools, Theatres, Mobile D.J. use, Foreground Music Reproduction, etc.
Shape
The Asymmetrical trapezoidal shape design provides a 45° taper angle for stage monitoring applications as well as for a general Front of House P.A. system
Pole Mount Sockets & Handles
For speaker stand mounting all GTs are equipped with a 35mm Ø (13/8”) aluminium pole mount socket. The GT Series models feature ergonomically placed carrying handles for a balanced “feel” when handling transporting.
Grilles
Extremely rugged 1.2mm (0.05”) steel grilles protect
the woofer without detracting from its sonic
performance in any way.
Rigging/Fly points & Stacking capabilities
All GT enclosures are provided with multiple M10 fly points to accept standard M 10 eye-bolts to facilitate safe and easy flying capabilities. The enclosures are equipped with rubber feet and stacking positions that are moulded into the cabinet enclosures, allowing stable stacking of 2 cabinet enclosures.
Power Amplifier (GT12A)
The bi-amplification system of the GT12A consists of two independent Class AB amplifiers, one for the LF woofer and one for the HF compression driver/ horn. Independent LF & HF Thermal and shortcircuit protection circuits are also featured. The Crossover circuitry features an active electronic 24dB/oct Linkwitz-Riley design. The innovative 2-channel on-board mixer (CH A and CH B) with each one featuring: Preamp Gain, Volume, High Frequency EQ, Low Frequency EQ controls, XLR/Jack combo inputs. An XLR-M output jack provides mixed signal output of input channels A and B.
This can be use as a Live Front of House Sound Reinforcement in Clubs, Discos, Piano Bars, Conference Halls, Houses of Worship, Sports Arenas, Schools, Theatres, Mobile D.J. use, Foreground Music Reproduction, etc.
Specification
- System Configuration (Way): 2 - full range
- Recommended amplifier (W rms): 250
- Long term power AES (W): 125
- Short-term power IEC268-5 (W): 500
- Nominal Impedance (Ohm): 8
- Frequency response (@-6Db): 56Hz - 20kHz
- Low frequency woofer (inch): 12” (2” coil)
- High frequency compr. Driver (inch): 1” (1,4” coil)
- Sensitivity @1W/1m: 97 db
- Max SPL: 121 db
- Dispersion (H x V °): 80°x50
- Crossover frequency: 2,5 kHZ
- Recommended HP filter: 40Hz - 12/24dB oct.
- Input connectors: 2x4-pin speakon
- Net dimensions (WxHxD): 390x630x350 mm
- Net weight: 14 Kg