MIPRO MP-10
Booster Relay Power Supply
Key Features
- MP-10 can independently provide power to external/internal antenna booster. This allows complicated external antenna dividing systems to work efficient independently so that longer antenna cable can connect with more boosters and compromise the signal loss due to long connecting cables.
- Aluminum casing has superb heat ventilation character and provides constant output voltage at 8 volt DC.
- Wide coverage bandwidth and low input loss : <1dB@0.1~1GHz，0.6dB@810MHz type.
- RF output is fully isolated from DC power. Ground circuit for high frequency RF prevents ground loop noise.
Specification
Input Power: 10~16VDC
Regulated Output Power: 8V DC / 1A
Attenuation: 100 MHz~1000 MHz <1dB
Impedance: 50Ω
Ground Isolation: RF output, DC ground isolation
Connector: TNC×2, 2.0mm DC×1
Dimensions: 90.3(W)×25(H)x55.4(D)mm / 3.5(W)x1(H)x2.2(D)"
Weight: 100g / 3.5oz
Note:
Refer to actual product in the event of product discrepancy.
Regulated Output Power: 8V DC / 1A
Attenuation: 100 MHz~1000 MHz <1dB
Impedance: 50Ω
Ground Isolation: RF output, DC ground isolation
Connector: TNC×2, 2.0mm DC×1
Dimensions: 90.3(W)×25(H)x55.4(D)mm / 3.5(W)x1(H)x2.2(D)"
Weight: 100g / 3.5oz
Note:
Refer to actual product in the event of product discrepancy.
Receivers
ACT-818
|
ACT-828
|
ACT-82a
|
ACT-71
|
ACT-72
|
ACT-74
|
ACT-717
|
ACT-727
|
ACT-747
|
ACT-51
|
ACT-52
|
ACT-515
|