MIPRO MR-90a
|
| |||
Description
The MIPRO MR-90a is designed to install in the wireless receiver slots found on professional video cameras. With optional accessories, the MR-90a can be configured five different ways to fit all types of camcorders such as the Sony Betacam series or Ikegami and other compatible camcorders.
The MR-90a compact, miniature receiver utilises the UHF band, PLL synthesized technology and dual-antenna true diversity design, ensuring clear and stable signal reception with no signal dropout even in the most unpredictable operating environments. It has a wide frequency range where 100 selectable frequencies are pre-programmed. With the world's first ACT programming function of MIPRO's ACT Series, the receiver and transmitter can set up a clear working frequency rapidly and automatically.
A weather-resistant metal case provides professional strength and durability. A standard LCD panel gives a clear and accurate display of all digital operations and setup.
The MR90a can also be installed on an active PA speaker via MA-909 wireless mixer, MT-90A wireless interlinking transmitter or ACT transmitters to turn active speakers into a wireless system.
The MR-90a compact, miniature receiver utilises the UHF band, PLL synthesized technology and dual-antenna true diversity design, ensuring clear and stable signal reception with no signal dropout even in the most unpredictable operating environments. It has a wide frequency range where 100 selectable frequencies are pre-programmed. With the world's first ACT programming function of MIPRO's ACT Series, the receiver and transmitter can set up a clear working frequency rapidly and automatically.
A weather-resistant metal case provides professional strength and durability. A standard LCD panel gives a clear and accurate display of all digital operations and setup.
The MR90a can also be installed on an active PA speaker via MA-909 wireless mixer, MT-90A wireless interlinking transmitter or ACT transmitters to turn active speakers into a wireless system.
Key Features
- Waterproof, compact, and ultra-thin rugged aluminum chassis construction.
- Various interface socket modules can be easily detached and installed to work with different camcorders, active speakers and other audio equipment.
- Detachable battery pack accessory needs only two AA-sized batteries to provide at least 10 continuous hours of operation, eliminating the need for external power.
- True diversity technology for best reception quality.
- 100 pre-programmed frequencies can be easily auto-scanned for a clear, interference-free frequency.
- ACT™ syncs the transmitter and receiver frequency automatically.
- LCD panel shows frequency, RF and AF signal strength, function, diversity, and battery strength.
- Electronic power switch eliminates any noise during power up and power down.
- Working voltage is 6~12V DC and the efficient power-saving design makes power consumption lower than 70mA.
- Precision SMA antenna connectors with removable soft antennas.
Specification
Frequency Range: UHF 620~934MHz
Bandwidth: 24MHz
Oscillation Mode: PLL Synthesized, Frequency Stability≦±0.005% (-10~+60℃)
Preset Channels: 100 selectable channels
Channel Setup: AutoScan
Receiving Mode: Dual antenna true diversity
Receiving Sensitivity: S/N>76dB at 6μV input
Frequency Response: 80Hz~18kHz (low frequency filter characteristics)
Spurious Rejection: >80dB
T.H.D.: <0.15% (at 1kHz, deviation at 15kHz)
Squelch Level: Adjustable range: 6dBuV~45dBuV at 5dB steps
Maximum S/N Ratio: 107dBA
Maximum Output Level: Balanced 2.2V rms open (THD=1%)
Display: LCD
Power: 6.5~12V DC
Current Consumption: Approx. 70mA
Dimensions: 83(W)×145(H)×35(D)mm / 3.3(W)x5.7(H)x1.4(D)"
Weight: Approx. 220g / 7.7oz
Operating Environment: -10~60℃
Notes:
Refer to actual product in the event of product description discrepancy.
Bandwidth: 24MHz
Oscillation Mode: PLL Synthesized, Frequency Stability≦±0.005% (-10~+60℃)
Preset Channels: 100 selectable channels
Channel Setup: AutoScan
Receiving Mode: Dual antenna true diversity
Receiving Sensitivity: S/N>76dB at 6μV input
Frequency Response: 80Hz~18kHz (low frequency filter characteristics)
Spurious Rejection: >80dB
T.H.D.: <0.15% (at 1kHz, deviation at 15kHz)
Squelch Level: Adjustable range: 6dBuV~45dBuV at 5dB steps
Maximum S/N Ratio: 107dBA
Maximum Output Level: Balanced 2.2V rms open (THD=1%)
Display: LCD
Power: 6.5~12V DC
Current Consumption: Approx. 70mA
Dimensions: 83(W)×145(H)×35(D)mm / 3.3(W)x5.7(H)x1.4(D)"
Weight: Approx. 220g / 7.7oz
Operating Environment: -10~60℃
Notes:
Refer to actual product in the event of product description discrepancy.
Transmitters
ACT-7H
|
ACT-7T
|
Accessories
MJ-90
|
MT-90A
|