Peavey PV 231EQ
High Performance Graphic Equalizer
|
|
Equalizer Rear View
| ||
Desription
The PV® 231EQ dual 31-band 2/3 octave graphic EQ brings quality features and low pricing together. Select between 6 dB or 12 dB cut or boost over frequencies ranging from 20 Hz to 20 kHz. Low cut filter switch with status LED helps remove rumble from open mics while the bypass switch with LED indicator is convenient for sound checks.
Key Features
- 48 kHz sample rate, 24-bit 256x over-sampled Delta-Sigma AD, DA
- USB A & B ports for memory storage and computer interface (PC and Mac)
- XLR inputs and outputs, AES-EBU digital input
- +24 dBu inputs and outputs
- Phantom power +48 volt
- Built-in signal generator (white, pink, sine)
- Easy preset and system updates via Internet
- Fully adjustable crossover points
- Easy-to-read LCD screen
- Features per input: 27-band Graphic EQ Autograph® algorithm for automatic EQ settings, Compressor/Limiter, Delay (340 ms)
- Features per output: Crossover/Bandpass filter (Butterworth, Bessel, Linkwitz-Riley), Parametric EQ (5-band, HP, LP Notch, Horn EQ, All-Pass), Compressor/Limiter, Delay with polarity inversion
- 2 input/6 output loudspeaker DSP management system
- Weight: 7.0 lb(3.175 kg)
Specification
- Channels: 2 (stereo)
- Bands: 31 per channel
- Connectors: XLR balanced inputs and outputs
- Frequency Centers: 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.5 kHz, 2 kHz, 2.5 kHz, 3.15 kHz, 4 kHz, 5 kHz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 16 kHz, 20 kHz
- Control Range: Selectable +/-12 dB or +/-6 dB
- Input Impedance: 50k ohms
- Output Impedance: 600 ohms Maximum
- Output Level: +21 dB
- Level Control: +/- 10 dB
- Signal to Noise: >93 dB unweighted
- Distortion: 0.005%
- Roll-Off Filters: 18 dB/octave, butterworth
- Low-Cut: Variable state (10 Hz to 250 Hz)
- High-Cut: Variable state (3 kHz to 40 kHz)
- Power Consumption: 15 watts