KEMPTON PW 218S
Description
PW PLYWOOD ENCLOSURES
Cabinet Enclosures
18mm plywood is used in the construction of cabinet enclosures on all models. The use of solid glue joints and the critical placement of internal bracing results in enclosures that virtually indestructible as well as resonance-free
Ergonomic Handles
Integrated handles ar built into the 100% plywood structure of the cabinet enclosure.
Connectors
All Kempton PW model Speakers feature professional 2 x 4-pin Speakon connectors that are mounted to a recessed panel to prevent inadvertent operation.
Finish
Durable textured black paint is used to withstand to the rigors of the road when transporting and provide a stylish appearance for permanent installations.
Heavy Duty Grilles
An extremely rugged 1.2mm (0.05”) steel grille with high aperture ratio protects the speakers without detracting from their sonic performance in any way.
Cabinet Enclosures
18mm plywood is used in the construction of cabinet enclosures on all models. The use of solid glue joints and the critical placement of internal bracing results in enclosures that virtually indestructible as well as resonance-free
Ergonomic Handles
Integrated handles ar built into the 100% plywood structure of the cabinet enclosure.
Connectors
All Kempton PW model Speakers feature professional 2 x 4-pin Speakon connectors that are mounted to a recessed panel to prevent inadvertent operation.
Finish
Durable textured black paint is used to withstand to the rigors of the road when transporting and provide a stylish appearance for permanent installations.
Heavy Duty Grilles
An extremely rugged 1.2mm (0.05”) steel grille with high aperture ratio protects the speakers without detracting from their sonic performance in any way.
Specification
- Recommended amplifier (W rms): 1000
- Long term power AES: 500W
- Short-term power IEC268-5: 1600W
- Nominal Impedance: 8ohm
- Frequency response @-6dB: 35Hz - 300Hz
- Low frequency woofer inch: 2x18” (3” coil)
- Sensitivity @1W/1m: 101dB
- Max SPL: 131dB
- Crossover frequency: External
- Recommended HP filter: 28Hz - 12/24 dB oct.
- Recommended ext. filter -: LP 90Hz 12/24dB oct.
- Input connectors: 2x4-pin speakon
- Net dimensions (W x H x D): 1000x615x642mm
- Net weight: 59Kg